Universal 14″ Front/Rear Set Back Mud Flap; 2″ Offset; 14″W x 15″H Mud Flap UF2214

The setback assembly positions the mud flap 2 inches behind the wheel well opening. Our black setback mud flaps are manufactured using 14 gauge steel for rigidity versus competitors’ 18 gauge steel which leaves the flap swaying because the steel is not thick enough. We finish coating our setback by spraying on a polyurea coating that encapsulates the steel. Powder coating quickly loses paint on the tire side when driving on gravel roads starting the rust process quickly. Ultimate Flaps are constructed using nearly indestructible semi-ridged material. This material holds its shape but is flexible. Curbs, rocks, logs will flex the flap, but the mud flap will return to its original position. Extremely cold weather is not a problem for Ultimate Flaps. Our material stays flexible to -42 below F. Getting built-up snow and ice off Ultimate Flaps takes a gentle kick on the back side. Ultimate Flaps stay rigid but conform to the wheel well of the vehicle without grapping between fasteners. The flap can be positioned to give nice straight line from flare vertically. Ultimate flaps use a grooved material to direct mud snow and rain down and away from your vehicle and whatever you tow. Ultimate Flaps won’t sail back while going down the road like rubber flaps. Additionally, our mud flaps won’t be torn off by backing up in deep snow. Mud with clay content that builds up won’t make Ultimate Flaps rest against tire because of the weight of the built-up mud. Ultimate Flaps are great for lifted vehicles needing additional coverage for larger tires. Made with pride in the USA.